JUT14-1.5/2-2 QUATTRO feed- through Push-in connection Spring Terminal Block Connector

Briefly:For power distribution blocks, the terminal blocks can be bridged with each other using conductor shafts, the corresponding plug-in bridges can be found in the accessories at the bottom. Working current:17.5 A,Operating Voltage:800 V Wiring method: Push-in spring connection. Rated wiring capacity: 1.5mm2. Installation method: NS 35/7,5,NS 35/15,              

Products Details

Return-pulling type spring terminal connects wire from upside, and the wire-in mouth of lead is set at the top of terminal, whose advantage is as follows: ●Solid wire plug-in connection. ●Save 70% operation time than screw type connector. ●Anti-vibration shock,anti loosening. ●With universal foot which can be installed on Din Rail NS 35. ●It can connect two conductors with ease, even large conductor cross sections are not a problem. ●Electric potential distribution can use fixed bridges in the terminal center. ●All types of accessories: End cover, End Stopper, Partition plate, marker trip, fixed bridge, insertion bridge, etc.
Product Image
Product number JUT14-1.5/DK/GY JUT14-1.5 PE
product type Rail wiring distribution block Rail wiring distribution block
Mechanical structure Push-in spring connection Push-in spring connection
layers 1 1
Electric potential 1 1
connection volume 2 2
Rated cross section 1.5 mm2 1.5 mm2   
Rated current 17.5A
Rated voltage 800V
open side panel Yes no
grounding feet no Yes
other The connecting rail needs to install the rail foot F-NS35 The connecting rail needs to install the rail NS 35/7,5 or NS 35/15
Application field Widely used in electrical connection, industrial Widely used in electrical connection, industrial
color (gray)、(dark gray)、(green)、(yellow)、(cream)、(orange)、(black)、(red)、(blue)、(white)、(purple)、(Brown)、customizable Green and Yellow
Stripping length 9mm — 10mm 9mm — 10mm
Rigid Conductor Cross Section 0.2-2.5mm² 0.2-2.5mm²
Flexible conductor cross section 0.2-1.5mm² 0.2-1.5mm²
Rigid Conductor Cross Section AWG 24-14 24-14
Flexible Conductor Cross Section AWG 24-16 24-16
size (this is the dimension of the JUT14-1.5 carrying rail foot F-NS35 installed on the rail)
thickness 4.2mm 4.2mm
width 53.3mm 46.92mm
high 35.6mm 34mm
NS35/7.5 high 43.1 mm 41.5mm
NS35/15 high 50.6mm 49mm
NS15/5.5 high
Material properties
Flame retardant grade, in line with UL94 V0 V0
Insulation Materials PA PA
Insulation material group I I
IEC Electrical parameters
standard test IEC 60947-7-1 IEC 60947-7-1
Rated voltage(III/3) 800V
Rated current(III/3) 17.5A
Rated surge voltage 6kv 6kv
Overvoltage class III III
pollution level 3 3
Electrical performance test
Surge Voltage Test Results Passed the test Passed the test 
Power frequency withstand voltage test results Passed the test Passed the test
Temperature rise test results Passed the test Passed the test
environmental conditions
Ambient temperature (operating) -60 °C — 105 °C (Maximum short-term operating temperature, electrical characteristics are relative to temperature.) -40℃~+105℃(Depends on the derating curve)
Ambient temperature (storage/transport) -25 °C — 60 °C (short term (up to 24 hours), -60 °C to +70 °C)  -25 °C - 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembled) -5 °C — 70 °C -5 °C — 70 °C
Ambient temperature (execution) -5 °C — 70 °C -5 °C — 70 °C
Relative Humidity (Storage/Transportation) 30 % — 70 % 30 % — 70 %
Environmental friendly
RoHS No excessive harmful substances No hazardous substances above threshold values
Standards and Specifications
Connections are standard IEC 60947-7-1 IEC 60947-7-1

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours